Scan, handwrite answers and upload solutions.  Show all required calculations for full credit.

1. Design a 16-Bit DAC Circuit

1. Calculate the values for all resistors

2. Include calculations and schematic

3. Capture a screenshot of several input/output settings from the 16-Bit DAC Circuit

2. For a Wien-bridge oscillator

1. Given R = 50kohm and C = 100nF what is the frequency of oscillation?

2. Given a required frequency of oscillation of f = 10kHz and R = 8kohm, what should the value of C be?

3. Calculate the signal to noise ratio given RMS Noise Voltage = 20mV and RMS Signal Voltage = 2.5V

4. Calculate ETotalRMS given e21RMS = 5V and e22RMS = 7V

5. Calculate SNR(dB) given a noise specification of 680nV

6. Calculate the noise specification given SNR(dB) = 350dB

7. For a simulated inductor application, to yield L = 75mH, R1 = 3kohm, and C1 = 200uF, determine required value of R2.

8. For a constant current generator, with a saturation voltage = 20V and a current reference of 30mA, calculate RLmin.

9. For a precision rectifier application, given EIRMS = 5V, determine EOpeak.

10. For an AC to DC converter, given EIPeak = 10V, determine EI.

• Posted: a year ago
• Due:
• Budget: \$3
Tags: math

Purchase the answer to view it

• Not rated

### ET 332 Final Exam

This item covers Modules 5-8. Scan, handwrite answers and upload solutions. Show all required calculations for full credit.

1. Design a …

• Not rated

### Final

This item covers Modules 5-8. Scan, handwrite answers and upload solutions. Show all required calculations for full credit.

1. Design a …

• Not rated

### 16-Bit DAC Circuit

This item covers Modules 5-8. Scan, handwrite answers and upload solutions. Show all required calculations for full credit.

1. Design a 16-Bit DAC Circuit

1.