six sigma tutor help

profileRami55

Measure Phase Assignment Document 

Assignement 2 : Due : July 12

 

1.        What conditions must exist prior to calculating the process capability ?

 

2.      Distinguish between gage repeatability and gage reproducibility ?

 

3.      Light bulbs are tested for luminance. Random samples of 5 are chosen.

The summary information below is for 30 Samples.

    

                                            

 

                    The specification limits are 90 lumes

 

a.       Estimate the process standard deviation

b.      Assume that all points on both charts plot within the control limits. What are the natural tolerance limits of the process?

c.       What are your conclusion regarding the ability of the process to produce items conforming to specifications? Find Cp and Cpk.

d.      Assuming that if an item exceeds the upper specification limit it can be reworked and if it is below the lower limit it must be scrapped, what percent scrap and rework is the process now producing?

e.       It the process were centered on at u = 90, what would be the effect on the percent scrap or rework?

 

 

 

 

 

 

4.      Is it possible for a process to be in control and still produce nonconforming output? What are some corrective measures under this circumstances?

 

 

5.      A customer has recently tightened the specification for a part your company supplies. The specification are now tighter the machine being used for the job is capable of. Identify the alternatives to solve this problem.

 

 

 

 

 

  • 8 years ago
  • 20
Answer(0)
Bids(0)