CH Week 5*****Already A++ Rated Tutorial Use as Guide Paper*****

profileSmart Study
 (Not rated)
 (Not rated)
Chat

·         Interfacing a Transducer to an Analog-to-Digital Converter and Interfacing Digital-to-Analog Converters to Loads

The purpose of this lab is to allow students to gain experience constructing Digital to Analog Converters in Multisim. Students will extend the concepts learned in the module and homework to build an 8-Bit DAC. Several binary inputs and the associated analog output values measured with a virtual digital multimeter will be captured in screenshots.

1.    Watch the video Week 5 – Op Amp DAC Circuit

2.    Determine the values of all the remaining seven resistors and fill in the table 1.

Table1:

Resistors

Values

R1

1k Ω

R2

 

R3

 

R4

 

R5

 

R6

 

R7

 

R8

 

3.    Recall the binary to decimal conversion and fill the table below:

Bits

Binary Input

Decimal conversion

MSB

(S1)

1000 0000

 

S2

 

 

S3

 

 

S4

 

 

S5

 

 

S6

 

 

S7

 

 

LSB

(S8)

0000 0001

 

4.    Construct an 8-bit binary weighted DAC in Multisim and measure the output voltage Vout using the multimeter and record the computed gain below.

Table2:

Bits

Binary Input

Vin

Rn

(n = 1,2,3,4,5,6,7,8)

RF

Output Voltage (Vout)

Voltage Gain (Av)

MSB

(S1)

1000 0000

 

 

 

 

 

S2

 

 

 

 

 

 

S3

 

 

 

 

 

 

S4

 

 

 

 

 

 

S5

 

 

 

 

 

 

S6

 

 

 

 

 

 

S7

 

 

 

 

 

 

LSB

(S8)

0000 0001

 

 

 

 

 

5.    Take the screenshots of Vout measurements for the input/output combination for each of the above 8-bits.

6.    Answer the following questions:

a.    Determine the approximate value of RF which results in accurate digital to analog conversion.

b.    Write the expression for Vout in terms of Vin, RF and R for each bit. Also, express Vout in terms of all 8 input voltages.

c.    Starting from the least significant bit to the most significant bit, what is the effect of feedback resistance on the output voltage?

d.    From your measurements, does increase in the digital value result in increase in analog value? Please explain.

e.    Is the voltage gain of the op Amp different for each bit? Please explain why?

7.    Create a new word document called “Lab5_StudentID.docx” with your GID substituted into the file name.

8.    Verify all calculations from analysis and measurements from simulations. Save the results along with the table and paste the screen captures in the word document. Make sure to answer the questions.

9.    Upload file “Lab5_StudentID” in Blackboard.

    • 7 years ago
    CH Week 5*****Already A++ Rated Tutorial Use as Guide Paper*****
    NOT RATED

    Purchase the answer to view it

    blurred-text
    • attachment
      ch_week_5.zip